|
-
The service life of any bearing largely depends on its acceptance for maintenance and upkeep. This is especially true in industrial applications, where working conditions are often harsh, loads...
-
The selection of specifications, dimensions, and accuracy should be based on the location of use, usage conditions, and environmental conditions. Matching with suitable bearings...
-
Firstly, accurately measure the size of each defect (asymmetric type) in the part, calculate the small grinding amount (to the finished product size deviation) M, and then offset the center of the part during grinding...
-
The oscillation of bearings has a significant impact on bearing failure, such as peeling, indentation, rust, cracks, wear, etc., which can be reflected in bearing oscillation detection. Therefore, the magnitude of oscillation can be measured by using...
-
When the inner diameter tolerance zone of the bearing forms a fit with the shaft tolerance zone, the tolerance code of the transition fit in the general basic hole system will become an over fit...
|
|
ENGLISH
CHINA
